2020년 4월 16일 목요일

[k8s/쿠버네티스] NFS Provisioner

- 0 개의 댓글

음..식상하지 않은 인사가 뭐가 있을까 고민해 봤는데 딱히 없네요 ㅠㅠ
여~~~하튼 k8s의 Dynamic volume을 구현하고 싶은데, 번거로운건 좀 싫구
이래저래 계속 알아보다 보니 NFS로 어느정도 구현할수 있는 프로젝트들이 있더라고요

대표적으로 NFS-Provisioner 그리고 NFS-Client가 있습니다.
이름이 ....-_- 인간적으로 거의 같아서..엄청 헷깔리고 뭐...아시다시피 영어로 된 설명도 고만고만하고 그래서 이럴때는 제일 좋은게 테스트죠!!!
사실 해봐야 쓸만한지도 알고....그래서 해봤습니다.
(영상은..고민 중이에요 / 영상이 글 쓰는 것보다 사실 요즘은 더 쉽긴 한데 말이죵)
0. 실행 전에 편리를 위해서 bash-completion.sh 를 설치합니당

bash <(curl -s https://raw.githubusercontent.com/sysnet4admin/IaC/master/manifests/bash-completion.sh)

1. NFS-Provisioner


1-1. 우선 serviceaccount랑 rbac이랑 svc랑 이것저것 설치해야 됩니다. 그래서 다 뭉쳐뒀죠 하하하하 :)

[root@m-k8s ~]# kubectl apply -f https://raw.githubusercontent.com/sysnet4admin/IaC/master/manifests/vol/nfs-provisioner/1.nfs-provisioner+.yaml
serviceaccount/nfs-provisioner created
role.rbac.authorization.k8s.io/leader-locking-nfs-provisioner created
rolebinding.rbac.authorization.k8s.io/leader-locking-nfs-provisioner created
clusterrole.rbac.authorization.k8s.io/nfs-provisioner-runner created
clusterrolebinding.rbac.authorization.k8s.io/run-nfs-provisioner created
storageclass.storage.k8s.io/nfs-svr-sc created
service/nfs-provisioner created
deployment.apps/nfs-provisioner created


[root@m-k8s ~]# k get pod -o wide
NAME                             READY   STATUS    RESTARTS   AGE   IP               NODE     NOMINATED NODE   READINESS GATES
nfs-provisioner-9fdb5b47-djg55   1/1     Running   0          24m   172.16.221.129   w1-k8s   <none>           <none>


1-2. 그리고 pvc 1Gi를 claim 해 봅니다아 그리고 확인해 보면 좀 있다가 pv가 생성된걸 확인할수 있죠

[root@m-k8s ~]# kubectl apply -f https://raw.githubusercontent.com/sysnet4admin/IaC/master/manifests/vol/nfs-provisioner/2.claim-pvc1Gi.yaml
persistentvolumeclaim/claim-svr-pvc created

[root@m-k8s ~]# k get pv,pvc
NAME                                                        CAPACITY   ACCESS MODES   RECLAIM POLICY   STATUS   CLAIM                   STORAGECLASS   REASON   AGE
persistentvolume/pvc-c8d98b5b-86b1-4b58-ae77-05d9233227ee   1Gi        RWX            Delete           Bound    default/claim-svr-pvc   nfs-svr-sc              14s

NAME                                  STATUS   VOLUME                                     CAPACITY   ACCESS MODES   STORAGECLASS   AGE
persistentvolumeclaim/claim-svr-pvc   Bound    pvc-c8d98b5b-86b1-4b58-ae77-05d9233227ee   1Gi        RWX            nfs-svr-sc     14s
[root@m-k8s ~]# kubectl apply -f https://raw.githubusercontent.com/sysnet4admin/IaC/master/manifests/vol/nfs-provisioner/3.sts-claim-vct1Gi.yaml
statefulset.apps/add-svr-pvc created

이게 w1-k8s 노드에 생성되도록 지정했고 /srv 위치에 했으니 해당 위치에 가면 생성규칙에 따라 디렉터리가 생성되어 있습니다아.

[root@w1-k8s ~]# ls /srv/
ganesha.log  nfs-provisioner.identity  pvc-c8d98b5b-86b1-4b58-ae77-05d9233227ee  v4old  v4recov  vfs.conf


1-3 이번에 sts로 생성해 볼까요?

[root@m-k8s ~]# kubectl apply -f https://raw.githubusercontent.com/sysnet4admin/IaC/master/manifests/vol/nfs-provisioner/3.sts-claim-vct1Gi.yaml
statefulset.apps/add-svr-pvc created

[root@m-k8s ~]# k get pv,pvc
NAME                                                        CAPACITY   ACCESS MODES   RECLAIM POLICY   STATUS   CLAIM                               STORAGECLASS   REASON   AGE
persistentvolume/pvc-22f09ae8-8813-40e1-ba82-c63f2049e200   1Gi        RWX            Delete           Bound    default/vct-svr-vol-add-svr-pvc-0   nfs-svr-sc              4s
persistentvolume/pvc-c8d98b5b-86b1-4b58-ae77-05d9233227ee   1Gi        RWX            Delete           Bound    default/claim-svr-pvc               nfs-svr-sc              4m2s

NAME                                              STATUS   VOLUME                                     CAPACITY   ACCESS MODES   STORAGECLASS   AGE
persistentvolumeclaim/claim-svr-pvc               Bound    pvc-c8d98b5b-86b1-4b58-ae77-05d9233227ee   1Gi        RWX            nfs-svr-sc     4m2s
persistentvolumeclaim/vct-svr-vol-add-svr-pvc-0   Bound    pvc-22f09ae8-8813-40e1-ba82-c63f2049e200   1Gi        RWX            nfs-svr-sc     4s

잘 되는군요!!

2. NFS-Client


2-0. 이걸 위해서는 NFS-Server가 있어야 하므로 우선 서버를 설치합니다.

[root@m-k8s ~]# bash <(curl -s https://raw.githubusercontent.com/sysnet4admin/IaC/master/manifests/vol/nfs-client-provisioner/0.Builder_nfs_server.sh)
Created symlink from /etc/systemd/system/multi-user.target.wants/nfs-server.service to /usr/lib/systemd/system/nfs-server.service.

[root@m-k8s ~]# exportfs
/nfs_shared     192.168.1.0/24

2-1. 그리고 나서 일전과 같이 serviceaccount와 이것저것을 설치합니다. rbac은 공통이라 unchanged 랍니다아~

[root@m-k8s ~]# kubectl apply -f https://raw.githubusercontent.com/sysnet4admin/IaC/master/manifests/vol/nfs-client-provisioner/1.nfs-client+.yaml
serviceaccount/nfs-client-provisioner created
role.rbac.authorization.k8s.io/leader-locking-nfs-provisioner unchanged
rolebinding.rbac.authorization.k8s.io/leader-locking-nfs-provisioner configured
clusterrole.rbac.authorization.k8s.io/nfs-provisioner-runner unchanged
clusterrolebinding.rbac.authorization.k8s.io/run-nfs-provisioner configured
storageclass.storage.k8s.io/nfs-sc created
deployment.apps/nfs-client created

nfs-client라는 pod가가 NFS-Provisioner의 역할을 합니다. (sc의 provisioner가 아니라 claim을 받아주는 역할이요)

[root@m-k8s ~]# k get pod
NAME                             READY   STATUS    RESTARTS   AGE
add-svr-pvc-0                    1/1     Running   0          18m
nfs-client-54fdb4c5bc-z6bdc      1/1     Running   0          81s <<<<<<
nfs-provisioner-9fdb5b47-djg55   1/1     Running   1          31m


2-2-1. 그러면 pvc를 claim해 볼까요? 새로 생성된건 claim-pvc 입니당 (헷깔리실까)

[root@m-k8s ~]# kubectl apply -f https://raw.githubusercontent.com/sysnet4admin/IaC/master/manifests/vol/nfs-client-provisioner/2-1.claim-pvc1Gi.yaml
persistentvolumeclaim/claim-pvc created
[root@m-k8s ~]# k get pv,pvc
NAME                                                        CAPACITY   ACCESS MODES   RECLAIM POLICY   STATUS   CLAIM                               STORAGECLASS   REASON   AGE
persistentvolume/pvc-22f09ae8-8813-40e1-ba82-c63f2049e200   1Gi        RWX            Delete           Bound    default/vct-svr-vol-add-svr-pvc-0   nfs-svr-sc              18m
persistentvolume/pvc-55c80adc-55ec-4db9-9768-bda13099f1f3   1Gi        RWX            Delete           Bound    default/claim-pvc                   nfs-sc                  4s
persistentvolume/pvc-c8d98b5b-86b1-4b58-ae77-05d9233227ee   1Gi        RWX            Delete           Bound    default/claim-svr-pvc               nfs-svr-sc              22m

NAME                                              STATUS   VOLUME                                     CAPACITY   ACCESS MODES   STORAGECLASS   AGE
persistentvolumeclaim/claim-pvc                   Bound    pvc-55c80adc-55ec-4db9-9768-bda13099f1f3   1Gi        RWX            nfs-sc         4s
persistentvolumeclaim/claim-svr-pvc               Bound    pvc-c8d98b5b-86b1-4b58-ae77-05d9233227ee   1Gi        RWX            nfs-svr-sc     22m
persistentvolumeclaim/vct-svr-vol-add-svr-pvc-0   Bound    pvc-22f09ae8-8813-40e1-ba82-c63f2049e200   1Gi        RWX            nfs-svr-sc     18m

2-2-2. pvc가 생성되었으니 생성된 pvc를 이용해서 pod에 volume을 마운트해서 올려봐야 겠죠오?

[root@m-k8s ~]# kubectl apply -f https://raw.githubusercontent.com/sysnet4admin/IaC/master/manifests/vol/nfs-client-provisioner/2-2.use-pvc.yaml
deployment.apps/use-pvc created


생성된 pod 내부 좀 볼까요?

[root@m-k8s ~]# k get pod
NAME                             READY   STATUS    RESTARTS   AGE
add-svr-pvc-0                    1/1     Running   0          19m
nfs-client-54fdb4c5bc-z6bdc      1/1     Running   0          2m15s
nfs-provisioner-9fdb5b47-djg55   1/1     Running   1          31m
use-pvc-64679676d7-cb7hx         1/1     Running   0          17s <<<<<<<<
[root@m-k8s ~]# k exec use-pvc-64679676d7-cb7hx -it -- /bin/bash

root@use-pvc-64679676d7-cb7hx:/# df -h
Filesystem                                                                           Size  Used Avail Use% Mounted on
overlay                                                                               37G  2.5G   35G   7% /
tmpfs                                                                                496M     0  496M   0% /dev
tmpfs                                                                                496M     0  496M   0% /sys/fs/cgroup
192.168.1.10:/nfs_shared/default-claim-pvc-pvc-55c80adc-55ec-4db9-9768-bda13099f1f3   37G  3.1G   34G   9% /pvc-vol
/dev/mapper/centos_k8s-root                                                           37G  2.5G   35G   7% /etc/hosts
shm                                                                                   64M     0   64M   0% /dev/shm
tmpfs                                                                                496M   12K  496M   1% /run/secrets/kubernetes.io/serviceaccount
tmpfs                                                                                496M     0  496M   0% /proc/acpi
tmpfs                                                                                496M     0  496M   0% /proc/scsi
tmpfs   

재미나게 마운트 되어 있고 디렉터리도 생성했네요 :)

2-3. sts로도 잘 되겠지만 pvc 생성 없이 바로 되는거 확인해 보도록 하죠

[root@m-k8s ~]# kubectl apply -f https://raw.githubusercontent.com/sysnet4admin/IaC/master/manifests/vol/nfs-client-provisioner/3.sts-claim-vct1Gi.yaml
statefulset.apps/add-pvc created
[root@m-k8s ~]# k get pod
NAME                             READY   STATUS    RESTARTS   AGE
add-pvc-0                        1/1     Running   0          39s
add-svr-pvc-0                    1/1     Running   0          20m
nfs-client-54fdb4c5bc-z6bdc      1/1     Running   0          3m33s
nfs-provisioner-9fdb5b47-djg55   1/1     Running   1          33m
use-pvc-64679676d7-cb7hx         1/1     Running   0          95s
[root@m-k8s ~]# k exec add-pvc-0 -it -- /bin/bash
root@add-pvc-0:/# df -h
Filesystem                                                                                   Size  Used Avail Use% Mounted on
overlay                                                                                       37G  2.8G   35G   8% /
tmpfs                                                                                        496M     0  496M   0% /dev
tmpfs                                                                                        496M     0  496M   0% /sys/fs/cgroup
192.168.1.10:/nfs_shared/default-vct-vol-add-pvc-0-pvc-10cc8eca-34f5-4679-a12e-e0c26841bc63   37G  3.1G   34G   9% /pvc-vol
/dev/mapper/centos_k8s-root                                                                   37G  2.8G   35G   8% /etc/hosts
shm                                                                                           64M     0   64M   0% /dev/shm
tmpfs                                                                                        496M   12K  496M   1% /run/secrets/kubernetes.io/serviceaccount
tmpfs                                                                                        496M     0  496M   0% /proc/acpi
tmpfs                                                                                        496M     0  496M   0% /proc/scsi
tmpfs                                                                                        496M     0  496M   0% /sys/firmware
root@add-pvc-0:/# exit
exit
[root@m-k8s ~]# ls /nfs_shared/
default-claim-pvc-pvc-55c80adc-55ec-4db9-9768-bda13099f1f3  default-vct-vol-add-pvc-0-pvc-10cc8eca-34f5-4679-a12e-e0c26841bc63
[root@m-k8s ~]#

2개의 디렉터리가 NFS_Server(/nfs_shared)에 만들어졌네요
NFS-Provisioner(와 client)를 이용하면 smb 마켓에서 k8s의 volume을 Dynamic에 가깝게 쓸수 있을꺼 같아요

=====================================

3줄 요약 (요즘 유행인거 같아서?)
1. NFS-Provisioner는 따로 NFS 설정 없이 hostPath를 바인딩해서 넘겨준다
   NFS-Client는 NFS 서버의 shared dir(예: /nfs_shared)를 바인딩해서 넘겨준다
2. 둘다 용량을 Dynamic하게 써주는 건 여전히 안된다 (용량 제한관리가 안됨)
3. pvc를 claim해서 pv가 자동생성 및 StatefulSet에 volumeClaimTemplates 으로 volume 마운트가 둘다 되니 골라서 쓰면 된다. (비슷비슷함)

빠잉~!
[Continue reading...]
 
Copyright © . 쿠버네티스 전문가 블로그 - Posts · Comments
Theme Template by BTDesigner · Powered by Blogger